Frameless Structural Aluminium Glass Curtain Wall Facade Aluminum Mullionless Spider Sealant Silicone Double Glazed Glazing System
REXI Structural Glazing Systems are streamlined curtain walls of glass that are attached using silicone bonding, or anchored by means of rods, cables, glass fins or other unobtrusive ways. Glass anchorage fins or struts provide the most unobtrusive support system of all, and a continuous wall of structural glazing supported by glass fins can appear to be entirely unsupported, allowing the clean, sleek lines of the architecture to stand tall.
Glass fins or struts provide the most impressive results in structural glazing, and depending on location and installation, can be the most cost-effective system for supporting the glass curtain that is structural glazing. Other systems include steel rods or vertical cables, both of which allow for greater height of unsupported spans. These systems, however, put a greater load on the boundary structure and therefore tend to be more expensive to install.
Point-supported structural glazing, especially if using glass fins as a backup support system, is the most transparent system currently available, and it can give the impression that an entire wall is completely unsupported. This can be custom engineered to fit any space and is assembled using silicone joints between individual panes of glass. To avoid the disparity that might arise by on site application of silicone, some structural glazing can be partially pre-prepared with aluminium channels affixed by silicone to the back of panes, allowing for on-site assembly using toggles, with minimal silicone application.
Structural glazing is used with the most impact on large, commercial buildings, but has many other applications, including glass entrance-ways, skylights, canopies, and glass elevator enclosures.
PRODUCT FEATURES
Self-balancing Tension Cable Supported Point-fixing Curtain Wall
It consists of pulling cable or draw rod and steel structure, with the pre-stressed force in pulling cable or draw rod keeping itself balanced and stable. It can take outside load action by decreasing the load transferred to the major structure. When designing, the pre-stressed force of the pulling cable or draw rod must be considered in advance. The pre-stressing of the tension must be pre-specified. The actual installation must be carried out in strict accordance with the prescribed standards.
Single Cable Point-fixing Curtain Wall
It is supported by concave soft cable networks, consists of large scale hanging cable and single layer wire crossing network point system. The large scale hanging cable network system forms different concave fold curtain wall by advanced form finding technology. This system has the super anti earthquake capability between the large scale cable and single layer wire network.
Glass Rib Supported Point-fixing Curtain Wall
There is no steel structure in this system, the glass rib is used for supporting, and the spider claws are connected to the strong thick glass rib, the fasteners of spider claws pass through glass panel holes and clamping the glass panel after being fastened. The top of glass rib is fixed as hanging connection, and the base is as flexible connection.
REXI Structural Glazing Systems provide unobstructed view as a whole, neat, bright and integrated with such advantages as safety, practicality and artistic taste thus becoming a vogue for modern construction and decorations.
System Achievements
• Energy Efficiency U-value low to 0.8 W/m2.K
• Water Penetration Resistance high to 1000 Pa
• Durable powder coating warranty to 20 years
• Glazing unit weight max to 1,000 kg
• Glazing thickness from 4mm to 60 mm
• Sound Resistance Rw to 68 dB
SPECIFICATIONS
|
Types
|
Unitized curtain wall, Stick curtain wall, Spider curtian wall
|
|
Materials
|
Aluminium alloy and glass/ Aluminum panel/ ACP/ Stone
|
|
Hardware
|
Chinese top brand/ Germany brand
|
|
Glass Types
|
Tempered, Laminated, Double Glazed, Ceramic Fritted
|
|
Surface Treatments
|
PVDF, Powder Coated, Anodized, Electrophoresis, Wooden Grain etc.
|
|
Aluminium Alloy
|
6063-T5/T6, 6061-T5 profile
|
|
Advantages
|
Professional Design Team/ 21,000 square meters large work shop/ International Standards
|
|
Standards
|
In complianca with US BS AU EU standards
|
|
Application
|
Residential Houses & apartments, Commercial Buildings, Skyscrapers etc.
|
|
Supply Ability
|
20,000 square meters per Month
|
|
Packing
|
Plastic Film, EPE Cloth, Wood Case, Steel stillage
|
|
Loading Port
|
QingDao
|
COMPANY PROFILE
REXI Industries is a professional leader in design, fabrication and installation of windows, doors and curtain walls. Here at REXI we have full commitment from concept through to completion delivering the project on time and budget. Our designs are roduced using tried and proven details developed by our own engineers. We will work with you to find the right system to meet your design's aesthetics and performance.
FABRICATION CAPACITIES
Proudly we have one of the largest fabrication workshop in North China which covers 21,000 square meters with over 100 experienced workers. We have the big enough capacity for the large scale project.
| Products Types |
Lines Qty |
Annual Production Capacity |
| Unitized Curtain Wall |
4 |
200,000 sqm |
| Stick Curtain Wall |
4 |
300,000 sqm |
| Aluminium Windows & Doors |
6 |
300,000 sqm |
QUALITY CONTROL
PACKING & SHIPMENT
PROJECTS
Audited Supplier 
){kind=link}